Irrigander 2 Splitter Valve Switch

The Irrigander 2 Splitter valve switch is a 2 zone switch that allows adding an irrigation valve without adding new field wiring. The added valve doesn’t need an output on the irrigation controller. Set the irrigation controller to the total run time desired for the two valves. The Irrigander 2 Splitter valve switch will divide the zone run time between the two valves each time the zone is activated. 

The Irrigander 2 Splitter valve switch is installed close to the valves to be controlled. Connect the input to the switch to the field wire connected to the irrigation controller and then connect the Irrigander 2 Splitter valve switch outputs to the two valves to be controlled (Irrigander 2 Splitter valve switch diagram). Simply set the irrigation controller to the total run time desired for the two valves. The Irrigander 2 Splitter valve switch will divide the zone run time equally between the two valves each time the zone is activated.

Use the Irrigander 2 Splitter valve switch to quickly bypass a broken irrigation wire. The Irrigander 2 Splitter valve switch can also control an added valve when the controller does not have an unused output or the irrigation cable does not have an unused wire.

Detailed specifications and operating instructions are in the User Guide, available below.

 
$79.95
Key Features and Specifications:
  • Add an additional valve to any existing set of valves
  • Each output can drive up to 2 valves
  • Sealed for protection from water
  • Industrial grade components for maximum reliability
  • 1 year limited warranty
  • 90 day free support
  • 90 day money back guarantee
  • Email for distributor pricing
Irrigander 2 Splitter Valve Switch V1.2 User Guide