Irrigander 4 Splitter Valve Switch

The Irrigander 4 Splitter valve switch  is a 4 zone switch that allows adding up to 3 irrigation valves without adding new field wiring. The added valves don’t need an output on the irrigation controller. Set the irrigation controller to the total run time desired for all the valves. The Irrigander 4 Splitter valve dwitch will detect the number of valves connected and divide the zone run time between the valves each time the zone is activated:

  • If 2 valves are connected each valve will run 50% of the total run time
  • If 3 valves are connected each valve will run 33% of the total run time
  • If 4 valves are connected each valve will run 25% of the total run time.

The Irrigander 4 Splitter valve switch is installed close to the valves to be controlled. Connect the input to the switch to the field wire connected to the irrigation controller and then connect the Irrigander 4 Splitter valve switch outputs to the valves to be controlled (Irrigander 4 Splitter Valve Switch diagram). Set the irrigation controller to the total run time desired for all the valves.

Use the Irrigander 4 Splitter valve switch to quickly bypass broken irrigation wires. The switch can also control added valves when the controller does not have enough unused outputs or the irrigation cable does not have enough unused wires.

Detailed specifications and operating instructions are in the User Guide, available below.

 
$89.95
Key Features and Specifications:
  • Add 1, 2, or 3 valves to any existing set of valves
  • Detects number of valves attached
  • Each output can drive up to 2 valves
  • Sealed for protection from water
  • Industrial grade components for maximum reliability
  • 1 year limited warranty
  • 90 day free support
  • 90 day money back guarantee
  • Email for distributor pricing
Irrigander 4 SplitterValve Switch V1.0 User Guide